Paradigm BX-12SQ Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS FOR BX-12SQ BACKBOX AND RVC-12SQ SUBWOOFER

STEP 2

PARADIGM DOES NOT SUPPLY SCREWS FOR MOUNTING BACKBOX

TO WALL. CHOOSE SCREWS APPROPRIATE FOR WALL COMPOSITION

AND WEIGHT OF BACKBOX WITH SUBWOOFER.

BX-12SQ BACKBOX: 26.4 lb / 12.0 kg

RVC-12SQ SUBWOOFER: 14.3 lb / 6.5 kg

TOTAL WEIGHT: 40.7 lb / 18.5 kg

IF YOU ARE NOT COMFORTABLE PERFORMING THE FOLLOWING PROCEDURE,

CONTACT A PROFESSIONAL INSTALLER.

NOTE: The required amount of damping material is included and correctly positioned in backbox. DO NOT remove, compact or add additional damping material. DO NOT add

damping material to wall directly behind backbox.

PARTS INCLUDED:

• 1 – Backbox • 2 – Mounting Brackets

• 1 – Wire Loop with screw • 1 – Removable MDF cover with 4 screws

• 4 – Gasket Tape Strips • 1 – Mounting Template

PARTS NOT INCLUDED:

• Minimum of 16 – #6 Drywall Screws (8 to attach brackets to box;

8 to attach box to wall) 3˝ Drywall nails may also be used to attach box to wall

NOTE: DO NOT PUNCTURE OR REMOVE THE PROTECTIVE PLASTIC THAT

COVERS PORT HOLES UNTIL READY TO INSTALL SUBWOOFER

60 in / 152.4 cm

TIP: Paint subwoofer before installing.

To prevent stray resonances from coloring output, backbox should

not touch studs—center it between studs.

INSTALLING BACKBOX

CAUTION: Mounting brackets are made of

galvanized steel. Edges may be sharp.

INSTALLING BRACKETS

NOTE: Wire loop to harness speaker wire must

be attached with screw provided.

BACKBOX DIMENSIONS

14 in / 35.6 cm

3-3/8 in

8.6 cm

WARNING! Ports run vertically inside

backbox. To avoid damage, position

installation brackets as shown.

STEP 1

FOR USE WITH 5/8˝ OR 1/2˝ DRYWALL ONLY

1 2

Résumé du contenu

Page 1 - BACKBOX DIMENSIONS

INSTALLATION INSTRUCTIONS FOR BX-12SQ BACKBOX AND RVC-12SQ SUBWOOFER STEP 2PARADIGM DOES NOT SUPPLY SCREWS FOR MOUNTING BACKBOXTO WALL. CHOOSE SCREWS

Page 2 - IMPORTANT! Port gaskets have

STEP 4INSTALLING SUBWOOFERRemove protective cover. To prevent air leaks, before installing subwoofer, apply gasket tape (included with subwoofer)along